It had been a while since I cleaned mine out there were about a half dozen coins in it and some paperclips.
To clean the plastic filter all you need to do is: 1) Get a 7MM socket or appropriate male star screwdriver 2) Remove the 3 screws that hold the bottom panel on the washer 3)Place a towel under the washer and carefully unscrew the filter out of the assembly (about a half gallon or more of water will come out as you take the filter out) 4)Remove all the debris from the catch basin in the filter 5)Put filter back in and re-attach the panel to bottom of washer The whole process takes less than 10 minutes and is very easy to do. Hope this helps someone Posted on Aug 22, 2012. Here is what fixed my F02 code: 1 Took off bottom plate below the door revealing the inside of the machine 2 Carefully unscrewed the plastic filter trap 3 It was stuffed with all sorts of junk so I emptied it 4 Replaced the Filter trap where it goes 5 Put the bottom plate back on below the front door All along the filter that helps keep the drain lines from clogging was clogged itself, if you havent checked yours ever it might be a good idea to look inside. I had the same or similar problem, after troubleshooting with the above post to no avail I started taking the maching apart.
0 kommentar(er)
